web mail | privacy policy | site map

Rod Ends - XMR/XML Series

Rod Ends - XMR/XML Series ARC have XMR/XML series chrome moly rod ends in stock. These rod ends are 2 piece in design, manufactured from 4130 material and chrome plated for corrossion resistance. The ball is teflon lined. The load rating for these rod ends is equal to all the major brands' precision designs at a significantly lower cost. Sizes in stock are as follows:

XMR5 - 5/16" RH shank x 5/16" hole, high strength.
XMR5 - 5/16" LH shank x 5/16" hole, high strength.

XMR6 - 3/8" RH shank x 3/8" hole, high strength.
XML6 - 3/8" LH shank x 3/8" hole, high strength.

XMR7 - 7/16" RH shank x 7/16" hole, high strength.
XML7 - 7/16" LH shank x 7/16" hole, high strength.

XMR8 - 1/2" RH shank x 1/2" hole, high strength.
XML8 - 1/2" LH shank x 1/2" hole, high strength.

XMR10 - 5/8" RH shank x 5/8" hole, high strength.
XML10 - 5/8" LH shank x 5/8" hole, high strength.

XMR12 - 3/4" RH shank x 3/4" hole, high strength.
XML12 - 3/4" LH shank x 3/4" hole, high strength.

XMR8-10 - 5/8" RH shank x 1/2" hole, 5/8" ball width, high strength.
XML8-10 - 5/8" LH shank x 1/2" hole, 5/8" ball width, high strength.

XMR8-12 - 3/4" RH shank x 1/2" hole, 3/4" ball width, high strength.
XML8-12 - 3/4" LH shank x 1/2" hole, 3/4" ball width, high strength.

XMR10-12 - 3/4" RH shank x 5/8" hole, 3/4" ball width, high strength.
XML10-12 - 3/4" LH shank x 5/8" hole, 3/4" ball width, high strength.

Midwest Control Rod Ends:

MXM-10-8 - 5/8" RH shank x 1/2" hole, 3/4" ball width, high strength.
MXML-10-8 - 5/8" LH shank x 1/2" hole, 3/4" ball width, high strength.


Note: MXM-10-8 & MXML-10-8 differ from other brands similar spec rod ends in that the ball width is 3/4", not 5/8". This feature is very handy when using these rod ends in wheelie bars where the ball end mounts between the four link brackets. No spacers are required.